GUIDE TO THE SELECTION OF BARBELLS We offer a wide range of barbells that can be classified into three categories: Olympic, hybrid, and specialist.

1- Olympic

Olympic weightlifting barbells built according to IWF standards. At the top of the line, we find the two PREMIUM models with black chromed bars: the Premium Male Olympic Barbell code 9015/4 and the Premium Female Olympic Barbell code 9015/5. These Olympic barbells, made in stainless steel with high tensile strength values, feature the best construction techniques in order to perform snatch and press exercises, and to support droppings on the platform. Just like all our Olympic barbells, the knurling is medium, suitable for training, especially in terms of the health of the hand. The offer of Olympic barbell is completed by the Training version: the Male Olympic Barbell code 9015/8. This barbell is designed to obtain the best possible solution between requirements of use, construction quality, and production costs. Having lower performance features, the technical data sheet of this barbell also shows the maximum loads per type of exercise.

2- Hybrids

In this category, we find two barbells: the Training Barbell 185 code 9015/3 and the Training Barbell 140 code 9014. This line of barbells offers the essential features of the Olympic ones, differing from them in their overall length, respectively 185 and 140 cm. This difference is useful both in terms of overall dimensions and in terms of training, as these barbells, thanks to the reduced length of the bar, are incredibly versatile and high performing. In particular, the Training Barbell 140 is recommended for the execution of the Hip Thrust exercise, as the reduced length can help handling the barbell on the hips during the performance.

3- Specialists

This category includes many barbells, because each one is created in response to specific technical needs of training and use.
    • The Powerlifting Barbell code 9015: it is an atypical Olympic barbell with a bar diameter of 32 mm instead of the traditional 28 mm.
    • 9015/2 COMPETITION POWERLIFT BARBELL 29 mm: designed based on the technical rules set out by the IPF it is characterized by the high construction quality.
    • The Axle Bar code 9015/7: barbell with a very thick bar, diameter 51 mm, suitable for athletic preparation programs and to strengthen the grip.
    • The Lightweight Aluminum Barbell code 9014/1 and the Lightweight Intro Barbell code 9015/1: these are two light barbells, ideal for learning weightlifting techniques for exercises such as snatch and press. The second one in particular represents an economical solution useful also to train and teach counting with more barbells in the setting of group lessons.
    • The EZ Barbell code 9027 and the EZ Barbell Premium code 9027P: classic curled barbells for biceps training. Effective and sharp the first one, while the second one comes with pads and superior finishing. VIEW THE COMPARATIVE
    • The Safety Squat Barbell code 9011/1: a bar with shoulder support pads, useful in overcoming certain limitations determined by joint mobility that would impair the ability to perform squats properly. In terms of training variation, it should be mentioned that a higher control on the weight load has a positive effect on the versatility of the tool. Leading to better execution of lunges, single-leg exercises, Bulgarian squat, step up.
    • The Preloaded Barbells code 8710-8745EZ Preloaded Barbells code 8610-8645: two sets of 10-45 kg preloaded barbells, consisting of 10 barbells per set. A classic of the physical culture because the preloaded barbells allow the maximum ease of use, especially in the climbing series, in the supersets and all similar techniques with no breaks between exercise series.
    • The Triceps Bar code 9027/1: is a one-of-a-kind barbell, created for triceps training, and offers the possibility to make alternative grips compared to traditional barbells.
    • The Olympic Hex Bar code 9012, the Super Hex Bar code 9012/1,the Low Hex Bar 9012/3: these are three original versions of the hexagonal barbell or trap bar. The first is a classical hex bar, on which we introduced several functional innovations and with long load sleeves, also suitable for wide bumper plates. The second one is an evolution born in the first place from the need to make the loading of weight plates easier (the loadable sleeves are placed in a raised position compared to the hexagonal base). The third is a quadra bar sui generis that allows a high level of freedom of movement in all motion planes, with particular reference to the depth of lunges and squats.
    • The Farmer Walk Bars code 9026: born for walking with weights in hand, they have turned out to be practical multi-purpose bars. with a 28 mm handle and reduced dimensions.
    • 9011/2 Seal Row Barbell: Barbell specifically designed for the 9021 SEAL ROW BENCH
Weight 20 Kg
Total length 2200 mm
Grip bar length 1310 mm
Grip diameter 28 mm
Loadable sleeves Rotating
Bearings and bushings 8 bearings, 2 bushings
Tightening system 4 seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 415 mm
Knurling Medium "diamond" knurling
Center knurl No
Grip Marking 810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coating Hard Chrome Black
Bar steel Special tempered alloy steel
Tensile strength 200.000 PSI
Static load capacity 700 Kg
Use Weightlifting
Discover more
Weight 15 Kg
Total length 2010 mm
Grip bar length 1310 mm
Grip diameter 25 mm
Loadable sleeves Rotating
Bearings and bushings 8 bearings, 2 bushings
Tightening system 4 seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 320 mm
Knurling Medium "diamond" knurling
Center knurl No
Grip Marking 810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coating Hard Chrome Black
Bar steel Special tempered alloy steel
Tensile strength 200.000 PSI
Static load capacity 580 Kg
Use Weightlifting
Discover more
Weight 20 Kg
Total length 2200 mm
Grip bar length 1310 mm
Grip diameter 28 mm
Loadable sleeves Rotating
Bearings and bushings 4 bearings, 2 bushings
Tightening system 4 seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 410 mm
Knurling Medium "diamond" knurling
Center knurl No
Grip Marking 810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coating Hard Chrome
Bar steel Special steel
Tensile strength 132.000 PSI
Static load capacity 300 Kg
Maximum load indications Deadlift: 180 Kg Squat: 150 Kg Snatch/Clean & Jerk: 100 Kg
Use Multi-purpose
Discover More
Weight 14 Kg
Total length 1850 mm
Grip bar length 1280 mm
Grip diameter 28 mm
Loadable sleeves Rotating
Bearings and bushings 4 bearings, 2 bushings
Tightening system 4 seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 250 mm
Knurling Medium "diamond" knurling
Center knurl No
Grip Marking 810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coating Hard Chrome
Bar steel Special steel
Tensile strength 132.000 PSI
Static load capacity 300 Kg
Maximum load indications Deadlift: 180 Kg Squat: 150 Kg Snatch/Clean & Jerk: 100 Kg
Use Multi-purpose
Discover More
Weight 10 Kg
Total length 1400 mm
Grip bar length 1000 mm
Grip diameter 28 mm
Loadable sleeves Rotating
Bearings and bushings 4 bearings, 2 bushings
Tightening system 4 seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 165 mm
Knurling Medium "diamond" knurling
Center knurl No
Grip Marking 810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coating Hard Chrome
Bar steel Special steel
Tensile strength 132.000 PSI
Static load capacity 300 Kg
Maximum load indications Deadlift: 180 Kg Squat: 150 Kg Snatch/Clean & Jerk: 100 Kg
Use Multi-purpose
Discover More
Weight 20 Kg
Total length 2208 mm
Grip bar length 1329 mm
Grip diameter 32 mm
Loadable sleeves Rotating
Bearings and bushings 2 needle bearings, 4 ball bearings, 2 bushings
Tightening system 4 seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 410 mm
Knurling Medium knurling
Center knurl yes, 20 cm long
Grip Marking 810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coating Hard Chrome
Bar steel Special tempered alloy steel
Tensile strength 70.000 PSI
Static load capacity 650 Kg
Maximum load indications Deadlift: 300 Kg Squat: 250 Kg Snatch/Clean & Jerk: 200 Kg
Use Powerlifting
Discover More
WEIGHT 20 Kg
LENGTH 2200 mm
HANDLE LENGTH 1310 mm
HANDLE DIAMETER 29 mm
LOADING ADAPTORS (COLLARS) Rotating (disc holder 12 mm)
EQUIPMENT 4 boccole
CLAMPING SYSTEM 4 seeger
LOAD ADAPTERS DIAMETER 50 mm
LOAD ADAPTERS LENGTH 433 mm
KNURLING Deep "Vulcano", crossed 30°
CENTRAL PART OF THE BAR yes
MARKER 810 mm
SUPERFICIAL COATING OF THE BAR Hard Chrome
STEEL OF THE BAR Special tempered alloy steel
BAR TRACTION RESISTANCE Tensile Strength PSI 242.350
STATIC MAXIMUM LOAD 2000 Kg
USE Powerlifting
Discover More
Weight 20 Kg
Total length 2120 mm
Grip bar length 1310 mm
Grip diameter 50 mm
Loadable sleeves Not rotating
Loadable sleeves diameter 50 mm
Loadable sleeves length 390 mm
Knurling No
Grip Marking No
Grip bar coating Micaceous paint
Bar steel Standard
Static load capacity 300 Kg
Use Athletic preparation, Powerlifting
Discover More
Weight 7 Kg
Total length 1836 mm
Grip bar length 1315 mm
Grip diameter 28 mm
Loadable sleeves Rotating
Bearings and bushings 4 needle bearings, 2 bushings
Tightening system 2 seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 243 mm
Knurling Medium knurling
Center knurl No
Grip Marking 810 mm (Powerlifting) and 910 mm (Weightlifting)
Bar material Aluminum
Static load capacity 100 Kg
Maximum load indications Deadlift: 80 Kg Squat: 50 Kg Snatch/Clean & Jerk: 80 Kg
Use Weightlifting, no narrow grip nor droppings
Discover More
Weight 3,5 Kg
Total length 1680 mm
Grip bar length 1280 mm
Grip diameter 28 mm
Loadable sleeves Not rotating
Loadable sleeves diameter 50 mm
Loadable sleeves length 195 mm
Knurling No
Grip Marking 910 mm (Weightlifting)
Bar steel Standard
Static load capacity 100 Kg
Maximum load indications Deadlift: 50 Kg Squat: 30 Kg Snatch/Clean & Jerk: 40 Kg
Use Weightlifting, no narrow grip nor droppings
Read More
Weight 9 Kg
Total length 1205 mm
Grip diameter 28 mm
Loadable sleeves Rotating
Bearings and bushings 2 bearings, 2 bushings
Tightening system Seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 165 mm
Knurling Medium knurling
Grip bar coating Hard Chrome
Bar steel Standard
Static load capacity 300 Kg
Use Physical culture
Discover More
Weight 9 Kg
Total length 1200 mm
Grip diameter 28 mm
Loadable sleeves Rotating
Bearings and bushings 4 bushings
Tightening system Seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 165 mm
Knurling Medium / Deep knurling
Grip bar coating Chrome
Bar steel Standard
Static load capacity 300 Kg
Use Physical culture
Discover More
Weight 9 Kg
Total length 915 mm
Rubberized grips diameter 35 mm
Loadable sleeves diameter 50 mm
Loadable sleeves length 170 mm
Bar coating Chrome
Bar steel Standard
use Physical culture
Discover More
Weight 24 Kg
Total length 2270 mm
Central bar length 1300 mm
Grips diameter 30 mm
Distance between the grip bars 400 mm
Loadable sleeves Rotating, equipped with bearings
Loadable sleeves diameter 50 mm
Knurling Medium knurling
Grip marking 810 mm (Powerlifting)
Bar coating Hard Chrome, black painted
Static load capacity 300 Kg
Use Training
Discover more
Weight 31 Kg
Total length 1750 mm
Loadable sleeves diameter 50 mm
Loadable sleeves length 400 mm
Grip handles diameter 28 mm
Bar coating Black painted
Loadable sleeves coating Hard Chrome
Static load capacity 600 Kg
Discover more
Weight 28 Kg
Total length 1900 mm
Loadable sleeves diameter 26 / 50 mm
Loadable sleeves length 400 mm
Grip handles diameter 25 / 38 / 50 mm
Bar coating Black painted
Loadable sleeves coating Hard Chrome
Static load capacity 600 Kg
Discover more
Weight 20 Kg
Total length 1720 mm
Loadable sleeves diameter 50 mm
Adapters 300 mm
Rubber grips 35 mm
Static load capacity 600 Kg
Discover more
WEIGHT 15 Kg
LENGTH 1600 mm
HANDLE LENGTH 1025 mm
HANDLE DIAMETER 28 mm
EQUIPMENT 4 Boccole
LOADING ADAPTORS (COLLARS) Rotanti
CLAMPING SYSTEM Seeger
LOAD ADAPTERS DIAMETER 50 mm
LOAD ADAPTERS LENGTH 255 mm
KNURLING Profonda a diamante appiattita
CENTRAL PART OF THE BAR Cambered – 200mm
SUPERFICIAL COATING OF THE BAR Chrome
STEEL OF THE BAR Standard
STATIC MAXIMUM LOAD 300 Kg
USE Seal Row Exercise
Discover more
Weight 2,0 Kg
Total Length 1320 mm
Grip Bar length 876 mm
Grip bar diameter 35 mm
Loadable sleeves Not rotating
Loadable sleeves diameter 28 mm
Loadable sleeves length 210 mm
Knurling No
Grip marking No
Maximum load 50 Kg
use Super Pump Training
Discover more
Weight 1,5 Kg
Total Length 1320 mm
Grip Bar length 880 mm
Grip bar diameter 28 mm
Loadable sleeves Not rotating
Loadable sleeves diameter 28 mm
Loadable sleeves length 210 mm
Knurling No
Grip marking No
Maximum load 50 Kg
use Super Pump Training
Discover more
[accordion_inner] [accordion-item_inner title="GUIDE TO THE SELECTION OF BARBELLS"]

We offer a wide range of barbells that can be classified into three categories: Olympic, hybrid, and specialist.

Olympic

Olympic weightlifting barbells built according to IWF standards. At the top of the line, we find the two PREMIUM models with black chromed bars: the Premium Male Olympic Barbell code 9015/4 and the Premium Female Olympic Barbell code 9015/5. These Olympic barbells, made in stainless steel with high tensile strength values, feature the best construction techniques in order to perform snatch and press exercises, and to support droppings on the platform. Just like all our Olympic barbells, the knurling is medium, suitable for training, especially in terms of the health of the hand.

The offer of Olympic barbell is completed by the Training version: the Male Olympic Barbell code 9015/8. This barbell is designed to obtain the best possible solution between requirements of use, construction quality, and production costs. Having lower performance features, the technical data sheet of this barbell also shows the maximum loads per type of exercise.

Hybrids

In this category, we find two barbells: the Training Barbell 185 code 9015/3 and the Training Barbell 140 code 9014. This line of barbells offers the essential features of the Olympic ones, differing from them in their overall length, respectively 185 and 140 cm. This difference is useful both in terms of overall dimensions and in terms of training, as these barbells, thanks to the reduced length of the bar, are incredibly versatile and high performing. In particular, the Training Barbell 140 is recommended for the execution of the Hip Thrust exercise, as the reduced length can help handling the barbell on the hips during the performance.

Specialists

This category includes many barbells, because each one is created in response to specific technical needs of training and use.

    • The Powerlifting Barbell code 9015: it is an atypical Olympic barbell with a bar diameter of 32 mm instead of the traditional 28 mm.
    • 9015/2 COMPETITION POWERLIFT BARBELL 29 mm: designed based on the technical rules set out by the IPF it is characterized by the high construction quality.
    • The Axle Bar code 9015/7: barbell with a very thick bar, diameter 51 mm, suitable for athletic preparation programs and to strengthen the grip.
    • The Lightweight Aluminum Barbell code 9014/1 and the Lightweight Intro Barbell code 9015/1: these are two light barbells, ideal for learning weightlifting techniques for exercises such as snatch and press. The second one in particular represents an economical solution useful also to train and teach counting with more barbells in the setting of group lessons.
    • The EZ Barbell code 9027 and the EZ Barbell Premium code 9027P: classic curled barbells for biceps training. Effective and sharp the first one, while the second one comes with pads and superior finishing.
    • The Safety Squat Barbell code 9011/1: a bar with shoulder support pads, useful in overcoming certain limitations determined by joint mobility that would impair the ability to perform squats properly. In terms of training variation, it should be mentioned that a higher control on the weight load has a positive effect on the versatility of the tool. Leading to better execution of lunges, single-leg exercises, Bulgarian squat, step up.
    • The Preloaded Barbells code 8710-8745EZ Preloaded Barbells code 8610-8645: two sets of 10-45 kg preloaded barbells, consisting of 10 barbells per set. A classic of the physical culture because the preloaded barbells allow the maximum ease of use, especially in the climbing series, in the supersets and all similar techniques with no breaks between exercise series.
    • The Triceps Bar code 9027/1: is a one-of-a-kind barbell, created for triceps training, and offers the possibility to make alternative grips compared to traditional barbells.
    • The Olympic Hex Bar code 9012, the Super Hex Bar code 9012/1,the Low Hex Bar 9012/3: these are three original versions of the hexagonal barbell or trap bar. The first is a classical hex bar, on which we introduced several functional innovations and with long load sleeves, also suitable for wide bumper plates. The second one is an evolution born in the first place from the need to make the loading of weight plates easier (the loadable sleeves are placed in a raised position compared to the hexagonal base). The third is a quadra bar sui generis that allows a high level of freedom of movement in all motion planes, with particular reference to the depth of lunges and squats.
    • The Farmer Walk Bars code 9026: born for walking with weights in hand, they have turned out to be practical multi-purpose bars. with a 28 mm handle and reduced dimensions.
    • 9011/2 Seal Row Barbell: Barbell specifically designed for the 9021 SEAL ROW BENCH
[/accordion-item_inner] [/accordion_inner]
[accordion-item_inner title="PREMIUM MALE OLYMPIC BARBELL - Code 9015/4"]
Weight 20 Kg
Total length 2200 mm
Grip bar length 1310 mm
Grip diameter 28 mm
Loadable sleeves Rotating
Bearings and bushings 8 bearings, 2 bushings
Tightening system 4 seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 415 mm
Knurling Medium "diamond" knurling
Center knurl No
Grip Marking 810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coating Hard Chrome Black
Bar steel Special tempered alloy steel
Tensile strength 200.000 PSI
Static load capacity 700 Kg
Use Weightlifting
Discover more [/accordion-item_inner] [accordion-item_inner title="PREMIUM FEMALE OLYMPIC BARBELL - Code 9015/5"]
Weight 15 Kg
Total length 2010 mm
Grip bar length 1310 mm
Grip diameter 25 mm
Loadable sleeves Rotating
Bearings and bushings 8 bearings, 2 bushings
Tightening system 4 seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 320 mm
Knurling Medium "diamond" knurling
Center knurl No
Grip Marking 810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coating Hard Chrome Black
Bar steel Special tempered alloy steel
Tensile strength 200.000 PSI
Static load capacity 580 Kg
Use Weightlifting
Discover more [/accordion-item_inner] [accordion-item_inner title="MALE OLYMPIC BARBELL - Code 9015/8"]
Weight 20 Kg
Total length 2200 mm
Grip bar length 1310 mm
Grip diameter 28 mm
Loadable sleeves Rotating
Bearings and bushings 4 bearings, 2 bushings
Tightening system 4 seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 410 mm
Knurling Medium "diamond" knurling
Center knurl No
Grip Marking 810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coating Hard Chrome
Bar steel Special steel
Tensile strength 132.000 PSI
Static load capacity 300 Kg
Maximum load indications Deadlift: 180 Kg Squat: 150 Kg Snatch/Clean & Jerk: 100 Kg
Use Multi-purpose
Discover More [/accordion-item_inner] [accordion-item_inner title="TRAINING BARBELL 185 - Code 9015/3"]
Weight 14 Kg
Total length 1850 mm
Grip bar length 1280 mm
Grip diameter 28 mm
Loadable sleeves Rotating
Bearings and bushings 4 bearings, 2 bushings
Tightening system 4 seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 250 mm
Knurling Medium "diamond" knurling
Center knurl No
Grip Marking 810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coating Hard Chrome
Bar steel Special steel
Tensile strength 132.000 PSI
Static load capacity 300 Kg
Maximum load indications Deadlift: 180 Kg Squat: 150 Kg Snatch/Clean & Jerk: 100 Kg
Use Multi-purpose
Discover More [/accordion-item_inner] [accordion-item_inner title="TRAINING BARBELL 140 - Code 9014"]
Weight 10 Kg
Total length 1400 mm
Grip bar length 1000 mm
Grip diameter 28 mm
Loadable sleeves Rotating
Bearings and bushings 4 bearings, 2 bushings
Tightening system 4 seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 165 mm
Knurling Medium "diamond" knurling
Center knurl No
Grip Marking 810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coating Hard Chrome
Bar steel Special steel
Tensile strength 132.000 PSI
Static load capacity 300 Kg
Maximum load indications Deadlift: 180 Kg Squat: 150 Kg Snatch/Clean & Jerk: 100 Kg
Use Multi-purpose
Discover More [/accordion-item_inner] [accordion-item_inner title="POWERLIFTING BARBELL 32 - Code 9015"]
Weight 20 Kg
Total length 2208 mm
Grip bar length 1329 mm
Grip diameter 32 mm
Loadable sleeves Rotating
Bearings and bushings 2 needle bearings, 4 ball bearings, 2 bushings
Tightening system 4 seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 410 mm
Knurling Medium knurling
Center knurl yes, 20 cm long
Grip Marking 810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coating Hard Chrome
Bar steel Special tempered alloy steel
Tensile strength 70.000 PSI
Static load capacity 650 Kg
Maximum load indications Deadlift: 300 Kg Squat: 250 Kg Snatch/Clean & Jerk: 200 Kg
Use Powerlifting
Discover More [/accordion-item_inner] [accordion-item_inner title="COMPETITION POWERLIFT BARBELL 29 mm - Code 9015/2"]
WEIGHT 20 Kg
LENGTH 2200 mm
HANDLE LENGTH 1310 mm
HANDLE DIAMETER 29 mm
LOADING ADAPTORS (COLLARS) Rotating (disc holder 12 mm)
EQUIPMENT 4 boccole
CLAMPING SYSTEM 4 seeger
LOAD ADAPTERS DIAMETER 50 mm
LOAD ADAPTERS LENGTH 433 mm
KNURLING Deep "Vulcano", crossed 30°
CENTRAL PART OF THE BAR yes
MARKER 810 mm
SUPERFICIAL COATING OF THE BAR Hard Chrome
STEEL OF THE BAR Special tempered alloy steel
BAR TRACTION RESISTANCE Tensile Strength PSI 242.350
STATIC MAXIMUM LOAD 2000 Kg
USE Powerlifting
Discover More [/accordion-item_inner] [accordion-item_inner title="AXLE BARBELL 50 - Code 9015/7"]
Weight 20 Kg
Total length 2120 mm
Grip bar length 1310 mm
Grip diameter 50 mm
Loadable sleeves Not rotating
Loadable sleeves diameter 50 mm
Loadable sleeves length 390 mm
Knurling No
Grip Marking No
Grip bar coating Micaceous paint
Bar steel Standard
Static load capacity 300 Kg
Use Athletic preparation, Powerlifting
Discover More [/accordion-item_inner] [accordion-item_inner title="LIGHTWEIGHT ALUMINIUM BARBELL - Code 9014/1"]
Weight 7 Kg
Total length 1836 mm
Grip bar length 1315 mm
Grip diameter 28 mm
Loadable sleeves Rotating
Bearings and bushings 4 needle bearings, 2 bushings
Tightening system 2 seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 243 mm
Knurling Medium knurling
Center knurl No
Grip Marking 810 mm (Powerlifting) and 910 mm (Weightlifting)
Bar material Aluminum
Static load capacity 100 Kg
Maximum load indications Deadlift: 80 Kg Squat: 50 Kg Snatch/Clean & Jerk: 80 Kg
Use Weightlifting, no narrow grip nor droppings
Discover More [/accordion-item_inner] [accordion-item_inner title="LIGHTWEIGHT INTRO BARBELL - Code 9015/1"]
Weight 3,5 Kg
Total length 1680 mm
Grip bar length 1280 mm
Grip diameter 28 mm
Loadable sleeves Not rotating
Loadable sleeves diameter 50 mm
Loadable sleeves length 195 mm
Knurling No
Grip Marking 910 mm (Weightlifting)
Bar steel Standard
Static load capacity 100 Kg
Maximum load indications Deadlift: 50 Kg Squat: 30 Kg Snatch/Clean & Jerk: 40 Kg
Use Weightlifting, no narrow grip nor droppings
Read More [/accordion-item_inner] [accordion-item_inner title="PREMIUM EZ BARBELL - Code 9027P"]
Weight 9 Kg
Total length 1205 mm
Grip diameter 28 mm
Loadable sleeves Rotating
Bearings and bushings 2 bearings, 2 bushings
Tightening system Seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 165 mm
Knurling Medium knurling
Grip bar coating Hard Chrome
Bar steel Standard
Static load capacity 300 Kg
Use Physical culture
Discover More [/accordion-item_inner] [accordion-item_inner title="EZ BARBELL - Code 9027"]
Weight 9 Kg
Total length 1200 mm
Grip diameter 28 mm
Loadable sleeves Rotating
Bearings and bushings 4 bushings
Tightening system Seegers
Loadable sleeves diameter 50 mm
Loadable sleeves length 165 mm
Knurling Medium / Deep knurling
Grip bar coating Chrome
Bar steel Standard
Static load capacity 300 Kg
Use Physical culture
Discover More [/accordion-item_inner] [accordion-item_inner title="TRICEPS BAR - Code 9027/1"]
Weight 9 Kg
Total length 915 mm
Rubberized grips diameter 35 mm
Loadable sleeves diameter 50 mm
Loadable sleeves length 170 mm
Bar coating Chrome
Bar steel Standard
use Physical culture
Discover More [/accordion-item_inner] [accordion-item_inner title="SAFETY SQUAT BARBELL - Code 9011/1"]
Weight 24 Kg
Total length 2270 mm
Central bar length 1300 mm
Grips diameter 30 mm
Distance between the grip bars 400 mm
Loadable sleeves Rotating, equipped with bearings
Loadable sleeves diameter 50 mm
Knurling Medium knurling
Grip marking 810 mm (Powerlifting)
Bar coating Hard Chrome, black painted
Static load capacity 300 Kg
Use Training
Discover more [/accordion-item_inner] [accordion-item_inner title="OLYMPIC HEX BAR - Code 9012"]
Weight 31 Kg
Total length 1750 mm
Loadable sleeves diameter 50 mm
Loadable sleeves length 400 mm
Grip handles diameter 28 mm
Bar coating Black painted
Loadable sleeves coating Hard Chrome
Static load capacity 600 Kg
Discover more [/accordion-item_inner] [accordion-item_inner title="SUPER HEX BAR - Code 9012/1"]
Weight 28 Kg
Total length 1900 mm
Loadable sleeves diameter 26 / 50 mm
Loadable sleeves length 400 mm
Grip handles diameter 25 / 38 / 50 mm
Bar coating Black painted
Loadable sleeves coating Hard Chrome
Static load capacity 600 Kg
Discover more [/accordion-item_inner] [accordion-item_inner title="LOW HEX BAR - Code 9012/3"]
Weight 20 Kg
Total length 1720 mm
Loadable sleeves diameter 50 mm
Adapters 300 mm
Rubber grips 35 mm
Static load capacity 600 Kg
Discover more [/accordion-item_inner] [accordion-item_inner title="SEAL ROW BARBELL - Code 9011/2"]
WEIGHT 15 Kg
LENGTH 1600 mm
HANDLE LENGTH 1025 mm
HANDLE DIAMETER 28 mm
EQUIPMENT 4 Boccole
LOADING ADAPTORS (COLLARS) Rotanti
CLAMPING SYSTEM Seeger
LOAD ADAPTERS DIAMETER 50 mm
LOAD ADAPTERS LENGTH 255 mm
KNURLING Profonda a diamante appiattita
CENTRAL PART OF THE BAR Cambered – 200mm
SUPERFICIAL COATING OF THE BAR Chrome
STEEL OF THE BAR Standard
STATIC MAXIMUM LOAD 300 Kg
USE Seal Row Exercise
Discover more [/accordion-item_inner] [accordion-item_inner title="SUPER PUMP BARBELL - Code 1660"]
Weight 2,0 Kg
Total Length 1320 mm
Grip Bar length 876 mm
Grip bar diameter 35 mm
Loadable sleeves Not rotating
Loadable sleeves diameter 28 mm
Loadable sleeves length 210 mm
Knurling No
Grip marking No
Maximum load 50 Kg
use Super Pump Training
Discover more [/accordion-item_inner] [accordion-item_inner title="SUPER PUMP IRON BARBELL - Code 1660/1"]
Weight 1,5 Kg
Total Length 1320 mm
Grip Bar length 880 mm
Grip bar diameter 28 mm
Loadable sleeves Not rotating
Loadable sleeves diameter 28 mm
Loadable sleeves length 210 mm
Knurling No
Grip marking No
Maximum load 50 Kg
use Super Pump Training
Discover more [/accordion-item_inner]

Showing 1–18 of 27 results

Barbell Weightlifting/Powerlifting

Discover our premium range of commercial Olympic barbells, engineered for weightlifting facilities, commercial gyms, and high-end home studios across Ireland. Built from high-tensile steel with precision knurling and smooth-spinning sleeves, these bars withstand extreme weight capacity while delivering optimal whip and control.

Built for Elite Weightlifting & Powerlifting

At Sidea Ireland, we supply performance-tested Olympic barbells ranging from competition-grade powerlifting barbells to specialised technique and hybrid models. Every piece of equipment is crafted to protect wrist joints during heavy compound lifts and dynamic snatch work. Explore our full collection below, or open the detailed technical guide above for complete spec comparisons.

super-pump-barbell-steel-28-mm-diameter-power-fitness-group-weight

1660 Super Pump Barbell

super-pump-iron-barbell-steel-28-mm-diameter-power-fitness-group-weight

1660/1 Super Pump Iron Barbell

EZ Fixed Rubber Barbell

8610-8645 EZ Fixed Rubber Barbell

8710-8745 Preloaded Fixed Rubber Barbells

8710-8745 Preloaded Fixed Rubber Barbells

9011/1 Safety Squat Barbell

9011/1 Safety Squat Barbell

9011/2 Seal Row Barbell

9011/2 Seal Row Barbell

9011/3 Multi Grip Bar

9011/3 Multi Grip Bar

9012 Olympic Hex Bar

9012 Olympic Hex Bar

9012/1 Super Hex Bar

9012/1 Super Hex Bar

9012/3 Low Hex Bar

9012/3 Low Hex Bar

training-barbell-140-cm-short-length-compact-weightlifting-10-kg-hip-thrust

9014 Training Barbell 140

9014/1 Lightweight Aluminium Barbell

9014/1 Lightweight Aluminium Barbell

9015 POWERLIFTING BARBELL 32

9015 Powerlifting Barbell 32

9015/1 Lightweight Intro Barbell

9015/1 Lightweight Intro Barbell

9015/2 Competition Powerlift Bar 29mm

9015/2 Competition Powerlift Bar 29mm

9015/3 Training Barbell 185

9015/3 Training Barbell 185

9015/4 Premium Male Olympic Barbell

9015/4 Premium Male Olympic Barbell

9015/5 Premium Female Olympic Barbell

9015/5 Premium Female Olympic Barbell

TO COMPLETE YOUR WEIGHTLIFTING / POWERLIFTING AREA

Barbell Accessories
Barbell Accessories

35 Products

Weight Plates & Bumper Plates
Weight Plates & Bumper Plates

19 Products

Smart Racks
Smart Racks

9 Products