GUIDE TO THE SELECTION OF BARBELLS We offer a wide range of barbells that can be classified into three categories: Olympic, hybrid, and specialist.

1- Olympic

Olympic weightlifting barbells built according to IWF standards. At the top of the line, we find the two PREMIUM models with black chromed bars: the Premium Male Olympic Barbell code 9015/4 and the Premium Female Olympic Barbell code 9015/5. These Olympic barbells, made in stainless steel with high tensile strength values, feature the best construction techniques in order to perform snatch and press exercises, and to support droppings on the platform. Just like all our Olympic barbells, the knurling is medium, suitable for training, especially in terms of the health of the hand. The offer of Olympic barbell is completed by the Training version: the Male Olympic Barbell code 9015/8. This barbell is designed to obtain the best possible solution between requirements of use, construction quality, and production costs. Having lower performance features, the technical data sheet of this barbell also shows the maximum loads per type of exercise.

2- Hybrids

In this category, we find two barbells: the Training Barbell 185 code 9015/3 and the Training Barbell 140 code 9014. This line of barbells offers the essential features of the Olympic ones, differing from them in their overall length, respectively 185 and 140 cm. This difference is useful both in terms of overall dimensions and in terms of training, as these barbells, thanks to the reduced length of the bar, are incredibly versatile and high performing. In particular, the Training Barbell 140 is recommended for the execution of the Hip Thrust exercise, as the reduced length can help handling the barbell on the hips during the performance.

3- Specialists

This category includes many barbells, because each one is created in response to specific technical needs of training and use.
    • The Powerlifting Barbell code 9015: it is an atypical Olympic barbell with a bar diameter of 32 mm instead of the traditional 28 mm.
    • 9015/2 COMPETITION POWERLIFT BARBELL 29 mm: designed based on the technical rules set out by the IPF it is characterized by the high construction quality.
    • The Axle Bar code 9015/7: barbell with a very thick bar, diameter 51 mm, suitable for athletic preparation programs and to strengthen the grip.
    • The Lightweight Aluminum Barbell code 9014/1 and the Lightweight Intro Barbell code 9015/1: these are two light barbells, ideal for learning weightlifting techniques for exercises such as snatch and press. The second one in particular represents an economical solution useful also to train and teach counting with more barbells in the setting of group lessons.
    • The EZ Barbell code 9027 and the EZ Barbell Premium code 9027P: classic curled barbells for biceps training. Effective and sharp the first one, while the second one comes with pads and superior finishing. VIEW THE COMPARATIVE
    • The Safety Squat Barbell code 9011/1: a bar with shoulder support pads, useful in overcoming certain limitations determined by joint mobility that would impair the ability to perform squats properly. In terms of training variation, it should be mentioned that a higher control on the weight load has a positive effect on the versatility of the tool. Leading to better execution of lunges, single-leg exercises, Bulgarian squat, step up.
    • The Preloaded Barbells code 8710-8745EZ Preloaded Barbells code 8610-8645: two sets of 10-45 kg preloaded barbells, consisting of 10 barbells per set. A classic of the physical culture because the preloaded barbells allow the maximum ease of use, especially in the climbing series, in the supersets and all similar techniques with no breaks between exercise series.
    • The Triceps Bar code 9027/1: is a one-of-a-kind barbell, created for triceps training, and offers the possibility to make alternative grips compared to traditional barbells.
    • The Olympic Hex Bar code 9012, the Super Hex Bar code 9012/1,the Low Hex Bar 9012/3: these are three original versions of the hexagonal barbell or trap bar. The first is a classical hex bar, on which we introduced several functional innovations and with long load sleeves, also suitable for wide bumper plates. The second one is an evolution born in the first place from the need to make the loading of weight plates easier (the loadable sleeves are placed in a raised position compared to the hexagonal base). The third is a quadra bar sui generis that allows a high level of freedom of movement in all motion planes, with particular reference to the depth of lunges and squats.
    • The Farmer Walk Bars code 9026: born for walking with weights in hand, they have turned out to be practical multi-purpose bars. with a 28 mm handle and reduced dimensions.
    • 9011/2 Seal Row Barbell: Barbell specifically designed for the 9021 SEAL ROW BENCH
Weight20 Kg
Total length2200 mm
Grip bar length1310 mm
Grip diameter28 mm
Loadable sleevesRotating
Bearings and bushings8 bearings, 2 bushings
Tightening system4 seegers
Loadable sleeves diameter50 mm
Loadable sleeves length415 mm
KnurlingMedium "diamond" knurling
Center knurlNo
Grip Marking810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coatingHard Chrome Black
Bar steelSpecial tempered alloy steel
Tensile strength200.000 PSI
Static load capacity700 Kg
UseWeightlifting
Discover more
Weight15 Kg
Total length2010 mm
Grip bar length1310 mm
Grip diameter25 mm
Loadable sleevesRotating
Bearings and bushings8 bearings, 2 bushings
Tightening system4 seegers
Loadable sleeves diameter50 mm
Loadable sleeves length320 mm
KnurlingMedium "diamond" knurling
Center knurlNo
Grip Marking810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coatingHard Chrome Black
Bar steelSpecial tempered alloy steel
Tensile strength200.000 PSI
Static load capacity580 Kg
UseWeightlifting
Discover more
Weight20 Kg
Total length2200 mm
Grip bar length1310 mm
Grip diameter28 mm
Loadable sleevesRotating
Bearings and bushings4 bearings, 2 bushings
Tightening system4 seegers
Loadable sleeves diameter50 mm
Loadable sleeves length410 mm
KnurlingMedium "diamond" knurling
Center knurlNo
Grip Marking810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coatingHard Chrome
Bar steelSpecial steel
Tensile strength132.000 PSI
Static load capacity300 Kg
Maximum load indicationsDeadlift: 180 Kg Squat: 150 Kg Snatch/Clean & Jerk: 100 Kg
UseMulti-purpose
Discover More
Weight14 Kg
Total length1850 mm
Grip bar length1280 mm
Grip diameter28 mm
Loadable sleevesRotating
Bearings and bushings4 bearings, 2 bushings
Tightening system4 seegers
Loadable sleeves diameter50 mm
Loadable sleeves length250 mm
KnurlingMedium "diamond" knurling
Center knurlNo
Grip Marking810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coatingHard Chrome
Bar steelSpecial steel
Tensile strength132.000 PSI
Static load capacity300 Kg
Maximum load indicationsDeadlift: 180 Kg Squat: 150 Kg Snatch/Clean & Jerk: 100 Kg
UseMulti-purpose
Discover More
Weight10 Kg
Total length1400 mm
Grip bar length1000 mm
Grip diameter28 mm
Loadable sleevesRotating
Bearings and bushings4 bearings, 2 bushings
Tightening system4 seegers
Loadable sleeves diameter50 mm
Loadable sleeves length165 mm
KnurlingMedium "diamond" knurling
Center knurlNo
Grip Marking810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coatingHard Chrome
Bar steelSpecial steel
Tensile strength132.000 PSI
Static load capacity300 Kg
Maximum load indicationsDeadlift: 180 Kg Squat: 150 Kg Snatch/Clean & Jerk: 100 Kg
UseMulti-purpose
Discover More
Weight20 Kg
Total length2208 mm
Grip bar length1329 mm
Grip diameter32 mm
Loadable sleevesRotating
Bearings and bushings2 needle bearings, 4 ball bearings, 2 bushings
Tightening system4 seegers
Loadable sleeves diameter50 mm
Loadable sleeves length410 mm
KnurlingMedium knurling
Center knurlyes, 20 cm long
Grip Marking810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coatingHard Chrome
Bar steelSpecial tempered alloy steel
Tensile strength70.000 PSI
Static load capacity650 Kg
Maximum load indicationsDeadlift: 300 Kg Squat: 250 Kg Snatch/Clean & Jerk: 200 Kg
UsePowerlifting
Discover More
WEIGHT20 Kg
LENGTH2200 mm
HANDLE LENGTH1310 mm
HANDLE DIAMETER29 mm
LOADING ADAPTORS (COLLARS)Rotating (disc holder 12 mm)
EQUIPMENT4 boccole
CLAMPING SYSTEM4 seeger
LOAD ADAPTERS DIAMETER50 mm
LOAD ADAPTERS LENGTH433 mm
KNURLINGDeep "Vulcano", crossed 30°
CENTRAL PART OF THE BARyes
MARKER810 mm
SUPERFICIAL COATING OF THE BARHard Chrome
STEEL OF THE BARSpecial tempered alloy steel
BAR TRACTION RESISTANCETensile Strength PSI 242.350
STATIC MAXIMUM LOAD2000 Kg
USEPowerlifting
Discover More
Weight20 Kg
Total length2120 mm
Grip bar length1310 mm
Grip diameter50 mm
Loadable sleevesNot rotating
Loadable sleeves diameter50 mm
Loadable sleeves length390 mm
KnurlingNo
Grip MarkingNo
Grip bar coatingMicaceous paint
Bar steelStandard
Static load capacity300 Kg
UseAthletic preparation, Powerlifting
Discover More
Weight7 Kg
Total length1836 mm
Grip bar length1315 mm
Grip diameter28 mm
Loadable sleevesRotating
Bearings and bushings4 needle bearings, 2 bushings
Tightening system2 seegers
Loadable sleeves diameter50 mm
Loadable sleeves length243 mm
KnurlingMedium knurling
Center knurlNo
Grip Marking810 mm (Powerlifting) and 910 mm (Weightlifting)
Bar materialAluminum
Static load capacity100 Kg
Maximum load indicationsDeadlift: 80 Kg Squat: 50 Kg Snatch/Clean & Jerk: 80 Kg
UseWeightlifting, no narrow grip nor droppings
Discover More
Weight3,5 Kg
Total length1680 mm
Grip bar length1280 mm
Grip diameter28 mm
Loadable sleevesNot rotating
Loadable sleeves diameter50 mm
Loadable sleeves length195 mm
KnurlingNo
Grip Marking910 mm (Weightlifting)
Bar steelStandard
Static load capacity100 Kg
Maximum load indicationsDeadlift: 50 Kg Squat: 30 Kg Snatch/Clean & Jerk: 40 Kg
UseWeightlifting, no narrow grip nor droppings
Read More
Weight9 Kg
Total length1205 mm
Grip diameter28 mm
Loadable sleevesRotating
Bearings and bushings2 bearings, 2 bushings
Tightening systemSeegers
Loadable sleeves diameter50 mm
Loadable sleeves length165 mm
KnurlingMedium knurling
Grip bar coatingHard Chrome
Bar steelStandard
Static load capacity300 Kg
UsePhysical culture
Discover More
Weight9 Kg
Total length1200 mm
Grip diameter28 mm
Loadable sleevesRotating
Bearings and bushings4 bushings
Tightening systemSeegers
Loadable sleeves diameter50 mm
Loadable sleeves length165 mm
KnurlingMedium / Deep knurling
Grip bar coatingChrome
Bar steelStandard
Static load capacity300 Kg
UsePhysical culture
Discover More
Weight9 Kg
Total length915 mm
Rubberized grips diameter35 mm
Loadable sleeves diameter50 mm
Loadable sleeves length170 mm
Bar coatingChrome
Bar steelStandard
usePhysical culture
Discover More
Weight24 Kg
Total length2270 mm
Central bar length1300 mm
Grips diameter30 mm
Distance between the grip bars400 mm
Loadable sleevesRotating, equipped with bearings
Loadable sleeves diameter50 mm
KnurlingMedium knurling
Grip marking810 mm (Powerlifting)
Bar coatingHard Chrome, black painted
Static load capacity300 Kg
UseTraining
Discover more
Weight31 Kg
Total length1750 mm
Loadable sleeves diameter50 mm
Loadable sleeves length400 mm
Grip handles diameter28 mm
Bar coatingBlack painted
Loadable sleeves coatingHard Chrome
Static load capacity600 Kg
Discover more
Weight28 Kg
Total length1900 mm
Loadable sleeves diameter26 / 50 mm
Loadable sleeves length400 mm
Grip handles diameter25 / 38 / 50 mm
Bar coatingBlack painted
Loadable sleeves coatingHard Chrome
Static load capacity600 Kg
Discover more
Weight20 Kg
Total length1720 mm
Loadable sleeves diameter50 mm
Adapters300 mm
Rubber grips35 mm
Static load capacity600 Kg
Discover more
WEIGHT15 Kg
LENGTH1600 mm
HANDLE LENGTH1025 mm
HANDLE DIAMETER28 mm
EQUIPMENT4 Boccole
LOADING ADAPTORS (COLLARS)Rotanti
CLAMPING SYSTEMSeeger
LOAD ADAPTERS DIAMETER50 mm
LOAD ADAPTERS LENGTH255 mm
KNURLINGProfonda a diamante appiattita
CENTRAL PART OF THE BARCambered – 200mm
SUPERFICIAL COATING OF THE BARChrome
STEEL OF THE BARStandard
STATIC MAXIMUM LOAD300 Kg
USESeal Row Exercise
Discover more
Weight2,0 Kg
Total Length1320 mm
Grip Bar length876 mm
Grip bar diameter35 mm
Loadable sleevesNot rotating
Loadable sleeves diameter28 mm
Loadable sleeves length210 mm
KnurlingNo
Grip markingNo
Maximum load50 Kg
useSuper Pump Training
Discover more
Weight1,5 Kg
Total Length1320 mm
Grip Bar length880 mm
Grip bar diameter28 mm
Loadable sleevesNot rotating
Loadable sleeves diameter28 mm
Loadable sleeves length210 mm
KnurlingNo
Grip markingNo
Maximum load50 Kg
useSuper Pump Training
Discover more
[accordion_inner][accordion-item_inner title="GUIDE TO THE SELECTION OF BARBELLS"]

We offer a wide range of barbells that can be classified into three categories: Olympic, hybrid, and specialist.

Olympic

Olympic weightlifting barbells built according to IWF standards. At the top of the line, we find the two PREMIUM models with black chromed bars: the Premium Male Olympic Barbell code 9015/4 and the Premium Female Olympic Barbell code 9015/5. These Olympic barbells, made in stainless steel with high tensile strength values, feature the best construction techniques in order to perform snatch and press exercises, and to support droppings on the platform. Just like all our Olympic barbells, the knurling is medium, suitable for training, especially in terms of the health of the hand.

The offer of Olympic barbell is completed by the Training version: the Male Olympic Barbell code 9015/8. This barbell is designed to obtain the best possible solution between requirements of use, construction quality, and production costs. Having lower performance features, the technical data sheet of this barbell also shows the maximum loads per type of exercise.

Hybrids

In this category, we find two barbells: the Training Barbell 185 code 9015/3 and the Training Barbell 140 code 9014. This line of barbells offers the essential features of the Olympic ones, differing from them in their overall length, respectively 185 and 140 cm. This difference is useful both in terms of overall dimensions and in terms of training, as these barbells, thanks to the reduced length of the bar, are incredibly versatile and high performing. In particular, the Training Barbell 140 is recommended for the execution of the Hip Thrust exercise, as the reduced length can help handling the barbell on the hips during the performance.

Specialists

This category includes many barbells, because each one is created in response to specific technical needs of training and use.

    • The Powerlifting Barbell code 9015: it is an atypical Olympic barbell with a bar diameter of 32 mm instead of the traditional 28 mm.
    • 9015/2 COMPETITION POWERLIFT BARBELL 29 mm: designed based on the technical rules set out by the IPF it is characterized by the high construction quality.
    • The Axle Bar code 9015/7: barbell with a very thick bar, diameter 51 mm, suitable for athletic preparation programs and to strengthen the grip.
    • The Lightweight Aluminum Barbell code 9014/1 and the Lightweight Intro Barbell code 9015/1: these are two light barbells, ideal for learning weightlifting techniques for exercises such as snatch and press. The second one in particular represents an economical solution useful also to train and teach counting with more barbells in the setting of group lessons.
    • The EZ Barbell code 9027 and the EZ Barbell Premium code 9027P: classic curled barbells for biceps training. Effective and sharp the first one, while the second one comes with pads and superior finishing.
    • The Safety Squat Barbell code 9011/1: a bar with shoulder support pads, useful in overcoming certain limitations determined by joint mobility that would impair the ability to perform squats properly. In terms of training variation, it should be mentioned that a higher control on the weight load has a positive effect on the versatility of the tool. Leading to better execution of lunges, single-leg exercises, Bulgarian squat, step up.
    • The Preloaded Barbells code 8710-8745EZ Preloaded Barbells code 8610-8645: two sets of 10-45 kg preloaded barbells, consisting of 10 barbells per set. A classic of the physical culture because the preloaded barbells allow the maximum ease of use, especially in the climbing series, in the supersets and all similar techniques with no breaks between exercise series.
    • The Triceps Bar code 9027/1: is a one-of-a-kind barbell, created for triceps training, and offers the possibility to make alternative grips compared to traditional barbells.
    • The Olympic Hex Bar code 9012, the Super Hex Bar code 9012/1,the Low Hex Bar 9012/3: these are three original versions of the hexagonal barbell or trap bar. The first is a classical hex bar, on which we introduced several functional innovations and with long load sleeves, also suitable for wide bumper plates. The second one is an evolution born in the first place from the need to make the loading of weight plates easier (the loadable sleeves are placed in a raised position compared to the hexagonal base). The third is a quadra bar sui generis that allows a high level of freedom of movement in all motion planes, with particular reference to the depth of lunges and squats.
    • The Farmer Walk Bars code 9026: born for walking with weights in hand, they have turned out to be practical multi-purpose bars. with a 28 mm handle and reduced dimensions.
    • 9011/2 Seal Row Barbell: Barbell specifically designed for the 9021 SEAL ROW BENCH
[/accordion-item_inner][/accordion_inner]
[accordion-item_inner title="PREMIUM MALE OLYMPIC BARBELL - Code 9015/4"]
Weight20 Kg
Total length2200 mm
Grip bar length1310 mm
Grip diameter28 mm
Loadable sleevesRotating
Bearings and bushings8 bearings, 2 bushings
Tightening system4 seegers
Loadable sleeves diameter50 mm
Loadable sleeves length415 mm
KnurlingMedium "diamond" knurling
Center knurlNo
Grip Marking810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coatingHard Chrome Black
Bar steelSpecial tempered alloy steel
Tensile strength200.000 PSI
Static load capacity700 Kg
UseWeightlifting
Discover more [/accordion-item_inner] [accordion-item_inner title="PREMIUM FEMALE OLYMPIC BARBELL - Code 9015/5"]
Weight15 Kg
Total length2010 mm
Grip bar length1310 mm
Grip diameter25 mm
Loadable sleevesRotating
Bearings and bushings8 bearings, 2 bushings
Tightening system4 seegers
Loadable sleeves diameter50 mm
Loadable sleeves length320 mm
KnurlingMedium "diamond" knurling
Center knurlNo
Grip Marking810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coatingHard Chrome Black
Bar steelSpecial tempered alloy steel
Tensile strength200.000 PSI
Static load capacity580 Kg
UseWeightlifting
Discover more [/accordion-item_inner] [accordion-item_inner title="MALE OLYMPIC BARBELL - Code 9015/8"]
Weight20 Kg
Total length2200 mm
Grip bar length1310 mm
Grip diameter28 mm
Loadable sleevesRotating
Bearings and bushings4 bearings, 2 bushings
Tightening system4 seegers
Loadable sleeves diameter50 mm
Loadable sleeves length410 mm
KnurlingMedium "diamond" knurling
Center knurlNo
Grip Marking810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coatingHard Chrome
Bar steelSpecial steel
Tensile strength132.000 PSI
Static load capacity300 Kg
Maximum load indicationsDeadlift: 180 Kg Squat: 150 Kg Snatch/Clean & Jerk: 100 Kg
UseMulti-purpose
Discover More [/accordion-item_inner] [accordion-item_inner title="TRAINING BARBELL 185 - Code 9015/3"]
Weight14 Kg
Total length1850 mm
Grip bar length1280 mm
Grip diameter28 mm
Loadable sleevesRotating
Bearings and bushings4 bearings, 2 bushings
Tightening system4 seegers
Loadable sleeves diameter50 mm
Loadable sleeves length250 mm
KnurlingMedium "diamond" knurling
Center knurlNo
Grip Marking810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coatingHard Chrome
Bar steelSpecial steel
Tensile strength132.000 PSI
Static load capacity300 Kg
Maximum load indicationsDeadlift: 180 Kg Squat: 150 Kg Snatch/Clean & Jerk: 100 Kg
UseMulti-purpose
Discover More [/accordion-item_inner] [accordion-item_inner title="TRAINING BARBELL 140 - Code 9014"]
Weight10 Kg
Total length1400 mm
Grip bar length1000 mm
Grip diameter28 mm
Loadable sleevesRotating
Bearings and bushings4 bearings, 2 bushings
Tightening system4 seegers
Loadable sleeves diameter50 mm
Loadable sleeves length165 mm
KnurlingMedium "diamond" knurling
Center knurlNo
Grip Marking810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coatingHard Chrome
Bar steelSpecial steel
Tensile strength132.000 PSI
Static load capacity300 Kg
Maximum load indicationsDeadlift: 180 Kg Squat: 150 Kg Snatch/Clean & Jerk: 100 Kg
UseMulti-purpose
Discover More [/accordion-item_inner] [accordion-item_inner title="POWERLIFTING BARBELL 32 - Code 9015"]
Weight20 Kg
Total length2208 mm
Grip bar length1329 mm
Grip diameter32 mm
Loadable sleevesRotating
Bearings and bushings2 needle bearings, 4 ball bearings, 2 bushings
Tightening system4 seegers
Loadable sleeves diameter50 mm
Loadable sleeves length410 mm
KnurlingMedium knurling
Center knurlyes, 20 cm long
Grip Marking810 mm (Powerlifting) and 910 mm (Weightlifting)
Grip bar coatingHard Chrome
Bar steelSpecial tempered alloy steel
Tensile strength70.000 PSI
Static load capacity650 Kg
Maximum load indicationsDeadlift: 300 Kg Squat: 250 Kg Snatch/Clean & Jerk: 200 Kg
UsePowerlifting
Discover More [/accordion-item_inner] [accordion-item_inner title="COMPETITION POWERLIFT BARBELL 29 mm - Code 9015/2"]
WEIGHT20 Kg
LENGTH2200 mm
HANDLE LENGTH1310 mm
HANDLE DIAMETER29 mm
LOADING ADAPTORS (COLLARS)Rotating (disc holder 12 mm)
EQUIPMENT4 boccole
CLAMPING SYSTEM4 seeger
LOAD ADAPTERS DIAMETER50 mm
LOAD ADAPTERS LENGTH433 mm
KNURLINGDeep "Vulcano", crossed 30°
CENTRAL PART OF THE BARyes
MARKER810 mm
SUPERFICIAL COATING OF THE BARHard Chrome
STEEL OF THE BARSpecial tempered alloy steel
BAR TRACTION RESISTANCETensile Strength PSI 242.350
STATIC MAXIMUM LOAD2000 Kg
USEPowerlifting
Discover More [/accordion-item_inner] [accordion-item_inner title="AXLE BARBELL 50 - Code 9015/7"]
Weight20 Kg
Total length2120 mm
Grip bar length1310 mm
Grip diameter50 mm
Loadable sleevesNot rotating
Loadable sleeves diameter50 mm
Loadable sleeves length390 mm
KnurlingNo
Grip MarkingNo
Grip bar coatingMicaceous paint
Bar steelStandard
Static load capacity300 Kg
UseAthletic preparation, Powerlifting
Discover More [/accordion-item_inner] [accordion-item_inner title="LIGHTWEIGHT ALUMINIUM BARBELL - Code 9014/1"]
Weight7 Kg
Total length1836 mm
Grip bar length1315 mm
Grip diameter28 mm
Loadable sleevesRotating
Bearings and bushings4 needle bearings, 2 bushings
Tightening system2 seegers
Loadable sleeves diameter50 mm
Loadable sleeves length243 mm
KnurlingMedium knurling
Center knurlNo
Grip Marking810 mm (Powerlifting) and 910 mm (Weightlifting)
Bar materialAluminum
Static load capacity100 Kg
Maximum load indicationsDeadlift: 80 Kg Squat: 50 Kg Snatch/Clean & Jerk: 80 Kg
UseWeightlifting, no narrow grip nor droppings
Discover More [/accordion-item_inner] [accordion-item_inner title="LIGHTWEIGHT INTRO BARBELL - Code 9015/1"]
Weight3,5 Kg
Total length1680 mm
Grip bar length1280 mm
Grip diameter28 mm
Loadable sleevesNot rotating
Loadable sleeves diameter50 mm
Loadable sleeves length195 mm
KnurlingNo
Grip Marking910 mm (Weightlifting)
Bar steelStandard
Static load capacity100 Kg
Maximum load indicationsDeadlift: 50 Kg Squat: 30 Kg Snatch/Clean & Jerk: 40 Kg
UseWeightlifting, no narrow grip nor droppings
Read More [/accordion-item_inner] [accordion-item_inner title="PREMIUM EZ BARBELL - Code 9027P"]
Weight9 Kg
Total length1205 mm
Grip diameter28 mm
Loadable sleevesRotating
Bearings and bushings2 bearings, 2 bushings
Tightening systemSeegers
Loadable sleeves diameter50 mm
Loadable sleeves length165 mm
KnurlingMedium knurling
Grip bar coatingHard Chrome
Bar steelStandard
Static load capacity300 Kg
UsePhysical culture
Discover More [/accordion-item_inner] [accordion-item_inner title="EZ BARBELL - Code 9027"]
Weight9 Kg
Total length1200 mm
Grip diameter28 mm
Loadable sleevesRotating
Bearings and bushings4 bushings
Tightening systemSeegers
Loadable sleeves diameter50 mm
Loadable sleeves length165 mm
KnurlingMedium / Deep knurling
Grip bar coatingChrome
Bar steelStandard
Static load capacity300 Kg
UsePhysical culture
Discover More [/accordion-item_inner] [accordion-item_inner title="TRICEPS BAR - Code 9027/1"]
Weight9 Kg
Total length915 mm
Rubberized grips diameter35 mm
Loadable sleeves diameter50 mm
Loadable sleeves length170 mm
Bar coatingChrome
Bar steelStandard
usePhysical culture
Discover More [/accordion-item_inner] [accordion-item_inner title="SAFETY SQUAT BARBELL - Code 9011/1"]
Weight24 Kg
Total length2270 mm
Central bar length1300 mm
Grips diameter30 mm
Distance between the grip bars400 mm
Loadable sleevesRotating, equipped with bearings
Loadable sleeves diameter50 mm
KnurlingMedium knurling
Grip marking810 mm (Powerlifting)
Bar coatingHard Chrome, black painted
Static load capacity300 Kg
UseTraining
Discover more [/accordion-item_inner] [accordion-item_inner title="OLYMPIC HEX BAR - Code 9012"]
Weight31 Kg
Total length1750 mm
Loadable sleeves diameter50 mm
Loadable sleeves length400 mm
Grip handles diameter28 mm
Bar coatingBlack painted
Loadable sleeves coatingHard Chrome
Static load capacity600 Kg
Discover more [/accordion-item_inner] [accordion-item_inner title="SUPER HEX BAR - Code 9012/1"]
Weight28 Kg
Total length1900 mm
Loadable sleeves diameter26 / 50 mm
Loadable sleeves length400 mm
Grip handles diameter25 / 38 / 50 mm
Bar coatingBlack painted
Loadable sleeves coatingHard Chrome
Static load capacity600 Kg
Discover more [/accordion-item_inner] [accordion-item_inner title="LOW HEX BAR - Code 9012/3"]
Weight20 Kg
Total length1720 mm
Loadable sleeves diameter50 mm
Adapters300 mm
Rubber grips35 mm
Static load capacity600 Kg
Discover more [/accordion-item_inner] [accordion-item_inner title="SEAL ROW BARBELL - Code 9011/2"]
WEIGHT15 Kg
LENGTH1600 mm
HANDLE LENGTH1025 mm
HANDLE DIAMETER28 mm
EQUIPMENT4 Boccole
LOADING ADAPTORS (COLLARS)Rotanti
CLAMPING SYSTEMSeeger
LOAD ADAPTERS DIAMETER50 mm
LOAD ADAPTERS LENGTH255 mm
KNURLINGProfonda a diamante appiattita
CENTRAL PART OF THE BARCambered – 200mm
SUPERFICIAL COATING OF THE BARChrome
STEEL OF THE BARStandard
STATIC MAXIMUM LOAD300 Kg
USESeal Row Exercise
Discover more [/accordion-item_inner] [accordion-item_inner title="SUPER PUMP BARBELL - Code 1660"]
Weight2,0 Kg
Total Length1320 mm
Grip Bar length876 mm
Grip bar diameter35 mm
Loadable sleevesNot rotating
Loadable sleeves diameter28 mm
Loadable sleeves length210 mm
KnurlingNo
Grip markingNo
Maximum load50 Kg
useSuper Pump Training
Discover more [/accordion-item_inner] [accordion-item_inner title="SUPER PUMP IRON BARBELL - Code 1660/1"]
Weight1,5 Kg
Total Length1320 mm
Grip Bar length880 mm
Grip bar diameter28 mm
Loadable sleevesNot rotating
Loadable sleeves diameter28 mm
Loadable sleeves length210 mm
KnurlingNo
Grip markingNo
Maximum load50 Kg
useSuper Pump Training
Discover more [/accordion-item_inner]

Showing 1–18 of 27 results

Barbell Weightlifting/Powerlifting

Discover our premium range of commercial Olympic barbells, engineered for weightlifting facilities, commercial gyms, and high-end home studios across Ireland. Built from high-tensile steel with precision knurling and smooth-spinning sleeves, these bars withstand extreme weight capacity while delivering optimal whip and control.

Built for Elite Weightlifting & Powerlifting

At Sidea Ireland, we supply performance-tested Olympic barbells ranging from competition-grade powerlifting barbells to specialised technique and hybrid models. Every piece of equipment is crafted to protect wrist joints during heavy compound lifts and dynamic snatch work. Explore our full collection below, or open the detailed technical guide above for complete spec comparisons.

super-pump-iron-barbell-steel-28-mm-diameter-power-fitness-group-weight

1660/1 Super Pump Iron Barbell

EZ Fixed Rubber Barbell

8610-8645 EZ Fixed Rubber Barbell

8710-8745 Preloaded Fixed Rubber Barbells

8710-8745 Preloaded Fixed Rubber Barbells

9011/1 Safety Squat Barbell

9011/1 Safety Squat Barbell

9011/2 Seal Row Barbell

9011/2 Seal Row Barbell

9011/3 Multi Grip Bar

9011/3 Multi Grip Bar

9012 Olympic Hex Bar

9012 Olympic Hex Bar

9012/1 Super Hex Bar

9012/1 Super Hex Bar

9012/3 Low Hex Bar

9012/3 Low Hex Bar

9015/1 Lightweight Intro Barbell

9015/1 Lightweight Intro Barbell

9015/2 Competition Powerlift Bar 29mm

9015/2 Competition Powerlift Bar 29mm

9015/3 Training Barbell 185

9015/3 Training Barbell 185

9015/4 Premium Male Olympic Barbell

9015/4 Premium Male Olympic Barbell

9015/5 Premium Female Olympic Barbell

9015/5 Premium Female Olympic Barbell

9015/7 Axle Barbell 50

9015/7 Axle Barbell 50

9015/8 Male Olympic Barbell

9015/8 Male Olympic Barbell

9015/9 Crossfit Olympic Barbell ®

9015/9 Crossfit Olympic Barbell ®

9026 Farmer Walk Bars

9026 Farmer Walk Bars

TO COMPLETE YOUR WEIGHTLIFTING / POWERLIFTING AREA

Barbell Accessories
Barbell Accessories

35 Products

Weight Plates & Bumper Plates
Weight Plates & Bumper Plates

19 Products

Smart Racks
Smart Racks

9 Products